*Adaptation: The process by which the human eye adjusts to a change in light level.
*AC (Alternating Current): Current which flows in one direction and then the other, alternately.
*Ballast: An auxiliary piece of equipment required to start and to properly control the flow of current to gas discharge light sources such as fluorescent and high intensity discharge lamps. Typically, magnetic ballasts (also called electromagnetic ballasts) contain copper windings on an iron core while electronic ballasts are smaller and more efficient and contain electronic components.
*Bulb: A loose way of referring to a lamp. "Bulb" refers to the outer glass bulb containing the light source
*Candela (cd): The measure of luminous intensity of a source in a given direction. The term has been retained from the early days of lighting when a standard candle of a fixed size and composition was defined as producing one candela in every direction. A plot of intensity versus direction is called a candela distribution curve and is often provided for reflectorized lamps and for luminaires with a lamp operating in them.
*Dimmable: Whether or not the lamp lumens can be varied while maintaining reliability.
*Distance Between Legs: For U-shaped Fluorescent lamps, this measurement is the average distance between the inner walls of the legs.
*Filament Design: Filaments are designated by a letter combination in which C is a coiled wire filament, CC is a coiled wire that is itself wound into a larger coil, and SR is a straight ribbon filament. Numbers represent the type of filament-support arrangement.
*Glare: Visual discomfort caused by excessive brightness is called discomfort glare. If task performance is affected it is called disability glare. Glare can be direct glare or indirect (reflected) glare.
*Ignitor: An electronic device providing a high voltage pulse to initiate an electrical discharge. Typically, the ignitor is paired with or is a part of the ballast.
*Adaptation: The process by which the human eye adjusts to a change in light level.
*AC (Alternating Current): Current which flows in one direction and then the other, alternately.
*Ballast: An auxiliary piece of equipment required to start and to properly control the flow of current to gas discharge light sources such as fluorescent and high intensity discharge lamps. Typically, magnetic ballasts (also called electromagnetic ballasts) contain copper windings on an iron core while electronic ballasts are smaller and more efficient and contain electronic components.
*Bulb: A loose way of referring to a lamp. "Bulb" refers to the outer glass bulb containing the light source
*Candela (cd): The measure of luminous intensity of a source in a given direction. The term has been retained from the early days of lighting when a standard candle of a fixed size and composition was defined as producing one candela in every direction. A plot of intensity versus direction is called a candela distribution curve and is often provided for reflectorized lamps and for luminaires with a lamp operating in them.
*Dimmable: Whether or not the lamp lumens can be varied while maintaining reliability.
*Distance Between Legs: For U-shaped Fluorescent lamps, this measurement is the average distance between the inner walls of the legs.
*Filament Design: Filaments are designated by a letter combination in which C is a coiled wire filament, CC is a coiled wire that is itself wound into a larger coil, and SR is a straight ribbon filament. Numbers represent the type of filament-support arrangement.
*Glare: Visual discomfort caused by excessive brightness is called discomfort glare. If task performance is affected it is called disability glare. Glare can be direct glare or indirect (reflected) glare.
*Ignitor: An electronic device providing a high voltage pulse to initiate an electrical discharge. Typically, the ignitor is paired with or is a part of the ballast.